--- title: "Poly Edge E100 and E220" slug: "poly-edge-e100-and-e220" description: "Looking for comprehensive online help with your Poly Edge E100 or E220? Our help guide has you covered! With clear and concise explanations, our guide is user-friendly and accessible for both beginners and advanced users alike. ENA by Zayo is here to help you get the most out of your Poly Edge E100 or E220 phone." updated: 2024-03-21T18:41:39Z published: 2024-03-21T18:41:39Z canonical: "help.ena.com/poly-edge-e100-and-e220" --- > ## Documentation Index > Fetch the complete documentation index at: https://help.ena.com/llms.txt > Use this file to discover all available pages before exploring further. # Poly Edge E100 and E220 ## Overview Although the Poly Edge E100 and E220 models vary slightly, both work in exactly the same way. The layout of the buttons on the phones and the key sequences you use to perform each function are the same for both of the models. ## Getting to Know Your Phone ### Soft Keys Soft keys appear at the bottom of your screen and change depending on where you are in a call sequence. You select a soft key by pressing the physical button directly underneath it. Watching your soft keys is one of the most helpful things you can do when using your phone. In almost all cases, the thing you are most likely to do next in a call will appear as a soft key. ### Buttons Buttons are physical keys on your phone which are programmed to always perform a specific function (e.g., microphone mute). ### LED Status Bar The LED lighting bar on the Poly Edge phone indicates your phone status at a glance. The Poly Edge E100 and 220 have a LED bar across the top of the phone display while all other Poly Edge models have a LED bar surrounding the phone display. | Status | LED | | --- | --- | | Incoming call | Breathing green | | Active call | Solid green | | Held call | Breathing red | | New voicemail message | Breathing red | | Off-hours mode | Breathing yellow | | Bluetooth discovery | Chasing blue | ### Locating Phone Extension The phone's extension is typically programmed into the first one or two button and is displayed on the screen. ### Navigate Onscreen Lists and Menus You use the navigation dial to navigate onscreen lists and menus. The button in the center functions as an enter or select key. ## Set Up and Check Voicemail ### Set Up Voicemail for Phone's Extension The first time you access the **Message Center** on a phone, the system will walk you through the voicemail setup. You may access the **Message Center** by pressing the **Voicemail** soft key. ### Check Voicemail From Your Phone Press the **Voicemail** soft key and follow the prompts. ### Check Voicemail From Another UCaaS Phone 1. Press the Voicemail button (marked with , , or **MESSAGE**) or the **Vmail** soft key on the phone you are using. 2. When you hear the voicemail greeting, press the star key (*). 3. Enter your full 10-digit number when prompted.Note:If you have an extension-only number, your full 10-digit number will be a customer prefix followed by your extension. If you do not know your customer prefix, check with your System Administrator. 4. Follow the prompts. ### Check Voicemail Remotely If you have a direct dial number: 1. Call your number. 2. When you hear your voicemail greeting, press the star key (*). 3. Follow the prompts. If you have an extension-only number: 1. Dial 877-675-1152. 2. Enter your full 10-digit number.Note:If you have an extension-only number, your full 10-digit number will be a customer prefix followed by your extension. If you do not know your customer prefix, check with your System Administrator.3. Follow the prompts. ### Voicemail Menu Options NoteDepending on the feature package assigned to the extension, sub-menus may vary slightly from those shown in the chart. ![ENA SmartVoice voicemail menu options (1)](https://cdn.us.document360.io/ed04ecbf-0868-4e77-a11e-6df8b843143d/Images/Documentation/ENA%20SmartVoice%20voicemail%20menu%20options%20(1).png?sv=2026-02-06&spr=https&st=2026-11-17T01%3A52%3A52Z&se=2026-11-17T02%3A52%3A52Z&sr=b&sp=r&sig=ZlZIEY1ajBxgi7%2Bmv%2FH%2BvwD2e%2FuU65JwFSAOr7qs4FU%3D) ## Place Calls Note You do not have to dial a nine, zero, or any other prefix to make an outbound call. You may dial any other UCaaS phone in your system using the phone’s 4 or 5-digit extension. ### Using the Handset 1. Using the dial pad, enter the number you are calling. 2. Pick up the handset. NoteYou can place a call by picking up the handset before dialing. However, please be aware that the system will attempt to complete the call after a slight pause in entering digits on the dial pad. ### Using the Speakerphone 1. Using the dial pad, enter the number you are calling. 2. Press the speaker button or the **Dial** soft key. NoteYou may place a call by pressing the speaker button before dialing. Just be aware the system will attempt to complete the call after a slight pause in entering digits on the dial pad. ### Using the Headset 1. With the optional headset connected, press the headset button to activate headset mode. 2. Enter the number. 3. Press the **Dial** soft key. NoteDuring a call, you can alternate between the headset, speakerphone, and handset modes by pressing the corresponding button or by picking up the handset. Headset mode requires a connected headset. ## Answer Calls ### Using the Handset When a call comes in, pick up the handset. ### Using the Speakerphone When a call comes in, press , the **Answer** soft key, or the flashing line key. ### Using the Headset With your headset connected and activated, press when a call comes in. ### Answer Second Incoming Call Press **Answer** or if you have multiple lines, the flashing **Line Key**. You may need to use the navigation medallion to highlight the second incoming call on the display, then press **Answer**. NoteWhen you answer a second call, the first call is automatically placed on hold. ## End Calls ### Using the Handset Press the **EndCall** soft key or place the handset in the cradle. ### Using the Speakerphone Press or the **EndCall** soft key. ### Using the Headset Press the **EndCall** soft key. ## Redial Press the right navigation arrow to open the **Placed Calls** list. The most recent outbound call is highlighted. Press **Dial**. ## Mute and Unmute Calls Press to mute the microphone during a call. Press again to unmute the call. ## Hold and Resume Calls ### Place a Call on Hold Press the **Hold** soft key or hold button during an active call. Hold buttons are marked with a phone handset combined with a pause symbol. ### Resume a Held Call Press the flashing line key, the **Resume** soft key, or the hold button. NoteIf there is more than one call on hold, you may need use the navigation dial to select the desired call before you see the **Resume** soft key. ## Transfer Calls The transfer button on your phone is labeled with an icon showing two handsets connected by an arrow. ![image-1658649460882](https://cdn.us.document360.io/ed04ecbf-0868-4e77-a11e-6df8b843143d/Images/Documentation/image-1658649460882.png?sv=2026-02-06&spr=https&st=2026-11-17T01%3A52%3A52Z&se=2026-11-17T02%3A52%3A52Z&sr=b&sp=r&sig=u7m9tOt88bMBKMHf8BeKjb1f0cmm0abpLLXt97IONDQ%3D) ### Blind Transfer To transfer a call to a recipient without speaking with the recipient first, use a Blind transfer. 1. Press the **Transfer** button. The call is immediately placed on hold. 2. Press the **Blind Transfer** softkey. 3. Dial the recipient's number. 4. Press **Send** or wait for the call to complete. ### Consultative Transfer If you would like to talk to the transfer recipient before sending the caller through, use a Consultative transfer. 1. When you are on an active call, press the **Transfer** button. The call is automatically placed on hold. 2. Dial the recipient. 3. Press **Send** or wait for the call to complete. 4. After you have spoken with the recipient and are ready to complete the transfer, press the **Transfer** button or the **Transfer** soft key. Both parties will be immediately connected. ### Cancel a Transfer Press the **Cancel** soft key at any point prior to completing a transfer to return to the original call. NoteYou may have to press **More** to see the **Cancel** soft key. ### Direct to Voicemail Transfer If you would like to transfer directly to the voicemail box of another extension within your organization, use a Direct to Voicemail Transfer. This will not ring the transfer recipient’s phone and the caller will immediately hear the voicemail greeting. #### Transferring to a 4-Digit Extension 1. Press the **Transfer** button. 2. Press **Blind** **Transfer**. 3. Dial *90 followed by the recipient's extension number. 4. Press **Send** or wait for the call to complete. #### Transferring to a 5-Digit or 6-Digit Extension 1. Press the **Transfer** button. 2. Press **Blind** **Transfer**. 3. Dial * followed by the recipient's extension number. 4. Press **Send** or wait for the call to complete. ## Make a Conference Call ### Conference in a Third Party NotePress the **More** soft key to see the **Confrnc** and **Split** soft keys. 1. Press the **Confrnc** soft key during an active call. The active call is automatically placed on hold. 2. Enter the number of the party you would like to conference in, then press the **Send** soft key or wait for the call to complete. 3. Press the **Confrnc** soft key again when the second party answers. All parties are now joined in the conference. - If they don't answer or decline to join the conference, tap **Cancel** and you will return to the original call. 4. Press the **End Call** soft key to disconnect all parties or to leave a three-way conference. - You can split the conference call into two individual calls by pressing the **Split** soft key. NotePressing **End Call** in a three-way conference will not disconnect all parties. The other parties will remain connected. If you would like to end the call for all three-way parties, **Split** into individual calls then **End Call** each. ### Join Current Calls Into a Conference Call When you are on one active call and have another caller on hold, or you have two callers on hold: 1. Press **More**. You may need to press **More** twice. 2. Press **Join**. ## Park Calls **Call Park** allows you to place a call on hold so it can be retrieved from any other UCaaS phone in your building. ### Park a Call To park a call: 1. Press the **Transfer** button. The call is automatically placed on hold. 2. Dial ***98**. 3. Press the **Send** soft key or wait for the call to complete. 4. You hear a message telling you the orbit number on which the call is parked and prompting you to complete the transfer. Press the **Transfer** button to complete. 5. Let the call recipient know they have a parked call and the orbit number on which the call is parked. ### Pick Up a Parked Call To pick up a parked call, go to any UCaaS phone in the building and dial *99 followed by the orbit number. NoteIf you would like to use the call park feature and it is not activated on your phone, please contact your System Administrator. ## Do Not Disturb (DND) Do Not Disturb (DND) sends all incoming calls directly to voicemail. Toggle Do Not Disturb on and off by pressing the **Home** button and selecting **DND** or by pressing the **DND** soft key. NoteIf you are not receiving calls, check to make sure Do Not Disturb is not activated on your phone. ## Bluetooth **Bluetooth is not supported on the Poly Edge E100.** Integrated Bluetooth provides the flexibility to move about with a Bluetooth headset or answer your mobile phone calls on your Poly desk phone. You may pair multiple devices to your Poly phone, but only one device will connect at a time. NoteIf you would like to use Bluetooth and it is not activated on your phone, please contact your System Administrator. ### Enable Bluetooth To enable Bluetooth on your Poly Edge Series phone: 1. Press the **Home** button and select **Bluetooth**. 2. Use soft keys or the navigation dial to select **On.** ### Pair a Bluetooth Device To pair a Bluetooth device with your Poly desk phone: 1. Press the **Home** button and select **Bluetooth**. 2. Select **Manage Devices**. 3. Press the **Scan** soft key. 4. Select your device from the list. 5. Press the **Pair** soft key. 6. If required by your device: 1. Verify the pairing code or passkey matches your Poly phone. 2. Select **Pair** on your device and **Allow** on your Poly Edge phone. If your Poly phone doesn't automatically connect to the Bluetooth device, go to **Home** > **Bluetooth** > select the device you're pairing > **Connect**. ### Using Your Paired Mobile Device with a Poly Phone #### Managing Calls to Your Paired Mobile Device NoteUse your mobile device to place calls. You can't place mobile calls from your Poly phone. After you've [paired your mobile device](/v1/docs/poly-edge-e450#pair-a-bluetooth-device) you can perform the following using your Poly desk phone: - Use the Poly phone to handle calls, including microphone mute and increase/decrease call volume. - Answer an incoming call. - Reject an incoming call. - End an active call to your mobile device from your Poly desk phone (or from the mobile device). #### Sync Mobile Contacts If you choose to pair your mobile device with your Poly phone you may display your mobile contacts from your desk phone. You will need to grant permissions from the mobile device *and* the Poly phone. 1. Immediately after pairing a mobile device, you will see a message on the device asking to **Allow access to contacts**. If you wish to access your mobile contacts from your Poly desk phone, select **Yes**. 2. Your Poly phone will display a message asking if you'd like to save your **Mobile Contacts** to your directory. 1. Select **Agree**. 2. The next screen will ask you to select Contacts, Favorites, or both. 3. Make your selection and press the **Sync** soft key. #### Access Mobile Contacts To access your mobile contacts from your Poly desk phone: 1. Press the **Home** button. 2. Select **Directories**. 3. Choose **Mobile Contacts.** Note - The **Mobile Contacts** are view-only from your Poly phone. Please use your mobile device if you need to edit or create new mobile contacts. - When your mobile device is disconnected, **Mobile Contacts** will no longer be accessible. - If you disconnect your mobile device, the **Mobile Contacts** directory automatically resyncs and updates when the device is reconnected. ### Disconnect or Unpair a Connected Bluetooth Device Disconnect or unpair a Bluetooth device when it's no longer needed. 1. Press the **Home** button and select **Bluetooth**. 2. Select **Manage Devices**. 3. Choose the device you wish to unpair or disconnect from the **Manage Devices** screen. 4. Press the **Disconnect** or **Remove** soft key. ## Paging ### Make Page Through Phone Speakers NoteZone pages are broadcast through the phone speakers, not your building intercom system. If your System Administrator has created paging groups (for example, All Call, Second Floor, etc.) and assigned your phone broadcast permission, you see a **Paging** soft key on your phone. To make a page through the phone speakers: 1. Press **Paging**. 2. Use the navigation dial to select the group you would like to page. 3. Press **Page**. ### Make Page Through Building Speakers Your System Administrator will provide you with an extension to dial to make an announcement through the building speakers. If your system is set up with one zone only (typically All Call): 1. Dial the intercom system extension. 2. Make your announcement. 3. When finished, hang up. If your intercom system is set up with multiple zones for announcements to be broadcast to specific areas. (e.g., outside, East wing, etc.): 1. Dial the intercom system extension. 2. When hear tone, enter the number of the zone to which you would like to broadcast. 3. When hear tone, make your announcement. 4. When finished, hang up. If UCaaS is integrated with your building's intercom system, your System Administrator will provide you with an extension to dial for making announcements through the building speakers. If your system is set up with one zone only (typically All Call): 1. Dial the intercom system extension. 2. Make your announcement. 3. When finished, hang up. If your intercom system is set up with multiple zones for broadcasting announcements to specific areas. (e.g., outside, East wing, etc.): 1. Dial the intercom system extension. 2. When you hear a tone, enter the number of the zone you wish to broadcast to. 3. After hearing another tone, make your announcement. 4. When finished, hang up. ## Local Call Recording To record a call: 1. Insert a USB 2.0 Type C flash drive into the USB port of your phone. 2. When you are on an active call, press **More** (you may need to press **More** twice). 3. Press **Record**. 4. Press **Start** to begin recording. 5. When you are recording a call, you see the **Stop** and **Pause** controls. You may need to press **More** to see **Pause**. NoteIf you would like to use the call recording feature and it is not activated on your phone, please contact your System Administrator. ## Access and Use Call History When your phone is in the Lines view (where you see your extension number next to keys), use the navigation arrows to access your call history. - Left arrow = received - Down arrow = missed - Right arrow = placed To place a call from your call history: 1. Press the navigation arrow to open the list. 2. Highlight the number you would like to call. 3. Press **Dial**. ## Clear Missed Calls Alert To clear the onscreen **Missed Calls** alert, press the down arrow on the navigation dial to open your **Missed Calls** list. ## Adjust Volume ### Adjust Call Volume During an active call, press **+** or **-** to adjust the call volume. ### Adjust Ringer Volume While the phone is idle or ringing, press **+** or **-** to adjust the ringer volume. ## Change Ring Tone AlertChanges to ring tones made through your phone's menu will reset to the default each evening. If you wish to customize the ring tone, please contact your System Administrator. ## Program Phone Keys Available phone keys set as speed dials and one-touch transfer buttons, are managed by your System Administrator or through the User Portal. WarningWhile it is possible to make changes through the phone menu instead of the portal, any changes made this way will be reset to the default when the phone reboots. The phone reboots if disconnected from its power source or during overnight system updates. ## Access (Star) Codes | Access Code | What It Does | Available In Feature Package | Notes | | --- | --- | --- | --- | | *53 | Directed Call Pickup | All except Prime | Dial *53 followed by the extension of a ringing phone to pick it up. | | *54 | Group Call Pickup | All except Prime | Dial *54 to pick up a call ringing on a phone that is a member of a Call Pickup Group of which your phone is a member. Call Pickup Groups are set up by your System Administrator. | | *62 | Enable Busy Call Forwarding | All except Pro and Executive | Extensions assigned a Pro or Executive feature package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *63 | Disable Busy Call Forwarding | All except Pro and Executive | Extensions assigned a Pro or Executive feature package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *69 | Automatic Recall | All | Plays an announcement of the number of the last call received. | | *72 | Enable Unconditional Call Forward | All except Pro and Executive | Extensions assigned a Pro or Executive Feature Package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *73 | Disable Unconditional Call Forward | All except Pro and Executive | Extensions assigned a Pro or Executive Feature Package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *92 | Enable Call Forwarding on No Answer | All except Pro and Executive | Extensions assigned a Pro or Executive feature package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *93 | Disable Call Forwarding on No Answer | All except Pro and Executive | Extensions assigned a Pro or Executive feature package, are forwarded using the **Reach Me** function in the User Portal and not access (star) codes. | | *98 | Call Park | All | Press Transfer followed by *98 to park a call. Call Park is enabled by your System Administrator. | | *99 | Retrieve Parked Call | All | Press *99 followed by the Park Orbit to retrieve a parked call. Call Park is enabled by your System Administrator. | | *318 | Voicemail | All | |